硅烷化氮化硼改性聚丙烯力学及热学性能的分子模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广西重点研发计划(149. 桂科AB24010119,ZY24212011);广西高层次领军人才项目(GXR-7BG2525008);新型电力系统运行与控制全国重点实验室资助课题(61012001025)


Molecular Simulation on Mechanical and Thermal Properties of Silanized Boron Nitride Modified Polypropylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对聚丙烯(PP)薄膜电容器在高温高场下热稳定性和力学性能不足,且改性机制缺乏分子尺度认识的问题,采用Materials Studio 构建了纯PP 及质量分数分别为1% ,3% ,5% ,7% 和9% 的VTS@BNNS / PP 无定形晶胞模型。模型以乙烯基三甲氧基硅烷(VTS)接枝氮化硼纳米片( BNNS) 形成界面过渡层,经几何优化、退火及NVT / NPT 平衡后,计算了界面相互作用能、内聚能密度、力学模量、热导率、均方位移、自由体积分数和玻璃化转变温度。结果表明,VTS接枝增强了BNNS 与PP 的界面吸附和相容性;适量VTS@BNNS 可填充分子链间隙,提高内聚能密度,并限制链段运动,从而协同提升力学和热学性能。7% 填充时综合性能最优,弹性模量、热导率和玻璃化转变温度较纯PP 分别提高42.0% ,83.6% 和41.6% ;9% 填充时性能回落。模拟结果与实验趋势一致,说明模型具有较好的准确性和预测能力,可为高性能PP 复合薄膜的设计提供依据。

    Abstract:

    To address the insufficient thermal stability and mechanical properties of polypropylene (PP) film capacitors under high-temperature and high-electric-field conditions, as well as the lack of molecular-scale understanding of their modification mechanisms, amorphous cell models of pure PP and VTS @ BNNS / PP composites with filler mass fractions of 1% , 3% , 5% , 7% , and 9% were constructed using Materials Studio. In the models, vinyltrimethoxysilane ( VTS ) was grafted onto boron nitride nanosheets ( BNNS ) to form an interfacial transition layer. After geometry optimization, annealing, and NVT / NPT equilibration, the interfacial interaction energy, cohesive energy density, mechanical modulus, thermal conductivity, mean square displacement, fractional free volume, and glass transition temperature were calculated. The results show that VTS grafting enhances the interfacial adsorption and compatibility between BNNS and PP. An appropriate amount of VTS@BNNS can fill the gaps between molecular chains, increase the cohesive energy density, and restrict the motion of chain segments, thereby synergistically improving the mechanical and thermal properties. The composite with 7% filler exhibits the optimal comprehensive performance, with elastic modulus, thermal conductivity, and glass transition temperature increased by 42.0% , 83.6% and 41.6% , respectively, compared with pure PP; however, the properties decrease at the filler content of 9% . The simulation results are consistent with the experimental trend, indicating that the established model has good accuracy and predictive capability, and can provide a guidance for the design of high-performance PP composite films.

    参考文献
    相似文献
    引证文献
引用本文

张镱议, 李志硕, 贾鹏飞, 余姝颖, 张钰业, 韦文厂.硅烷化氮化硼改性聚丙烯力学及热学性能的分子模拟[J].高分子材料科学与工程,2026,42(7):41-51. Yiyi Zhang, Zhishuo Li, Pengfei Jia, Shuying Yu, Yuye Zhang, Wenchang Wei. Molecular Simulation on Mechanical and Thermal Properties of Silanized Boron Nitride Modified Polypropylene[J]. Polymer Materials Science & Engineering,2026,42(7):41-51.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2026-11-19
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司